Interior Painting and Molding Installation Project in Wappingers Falls, NY
This client had just purchased a new home and wanted to have all new chair molding, picture molding, crown molding, window and door trim and baseboard molding installed. There were also popcorn ceilings on the main level living room, entry and dinning rooms, as well as the lower level media room. We installed over 1,200 feet of molding. We then caulked all of the installed moldings and filled in all of the nail holes. They then sanded the popcorn ceilings down and skim coated the ceiling using standard drywall compound to a level 5 finish. A Dewalt HEPA vacuum attached to a rotary sanding pole was used to get the ceilings to the level 5 finish with very little to no dust. Then, we started the painting process by patching all of the cracks and imperfections in the walls and ceilings. All the patches and the ceilings were primed with Sherwin Williams Problock latex primer. Next, the final coats of paint were applied using Sherwin Williams Duration Matte Finish on the walls, and Sherwin Williams Duration semi-gloss finish on the lower half wall. The final product couldn't have turned out any better!